Sterilising Lamp by Frank Chou

Frank Chou's Sterilising Lamp combines an ultraviolet (UV) light with a tray, and would ideally be kept by the entrance to the user's home for them to put items in such as their mobile phone, keys or wallet as they enter the room. The user would press the cover body to activate the internal UV light source, the body then lowers to cover the items in the tray with the UV light. After 60 seconds the cover automatically rises to reveal the now-sterilised items again. Frank Chou aimed to create an "unconscious design" when creating the lamp, which he hopes can blend into the home and become part of people's daily routine, as opposed to a disinfection method that they consciously have to think about doing.

Source: https://www.dezeen.com/2020/03/09/coronavirus-protection-products/

Comments

Ventilaid breathing device Mk III

VentilAid is a very simple, yet effective device for non-invasive ventilation. It is especially projected to help patients suffering from COVID-19. VentilAid helps breathing, prevents alveoli from collapsing and monitors patients health. Major features Compactness and mobility Universal power supply Automatic function in CPAP and BiPAP modes FiO2 do 70%, Up to 70% FiO2 Pressure up to 15 cm H2O (wi th a greater technical capablity of up to 30cm H2O) The device adapts to the breathing rhythm of the patient https://www.ventilaid.org/ventilaid-breathing-device-mk-iii/

Mask Strap Efficiency This simple but useful tool is designed to make face masks less painful to wear for medical workers treating coronavirus patients. The part is made by printing a set, and then connecting with any filament which will also set its width. In this way, the filament which is needed for a single print is reduced and 18 sets on a 250x250mm print bed are allowed. Small protrusions on both sides of the plastic buckle hold the mask strap and the mask strap does not exert painful pressure on the ears. References: Michael B. ( 2020 ). Prusa Printers. Mask strap efficiency print. https://www.prusaprinters.org/prints/28959-mask-strap-efficiency-print

COVID19 Glove Remover Hook to remove the gloves after use. Designed to hang on a door, without installation. After removing both gloves, we can throw them away by holding the hook at the back, without having to make contact with the gloves. There are three models for different door thicknesses: 35mm, 40mm and 45mm link: https://grabcad.com/library/covid19-glove-remover-1

3D Printing/Medical Masks-Devices/COVID19

Search This Blog