Skip to main content

Savegrabber

By

Savegrabber - open door without touching the handle, press knobs without touching - additional barrier for the coronavirus and other germs

Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber".
It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip to press buttons in the elevator or light switches.
The touching surfaces are designed to be as small as possible, so the contamination should be low. My idea is to wear the Savegrabber with a retractable key chain on the belt or on a bag.
If everyone would use this, I think this could be an additional barrier to germs.
The print in PLA is sufficient and you can clean it using alcoholic  disinfect.
Savegrabber - open door without touching the handle, press knobs ...



https://www.prusaprinters.org/prints/26146-savegrabber-open-door-without-touching-the-handle-/files




Comments

Post a Comment

Popular posts from this blog

New ventilator mask protects entire face from coronavirus

By
https://www.israel21c.org/new-ventilator-mask-protects-entire-face-from-coronavirus/ Many people are wearing facemasks to avoid breathing airborne coronavirus particles, and to keep from touching their noses and mouths. However, even N95 masks can’t fully block tiny virus particles and can’t kill the virus (two masks  under development in Israel  aim to do that). Any blocked viral particles stay on the mask’s surface and pose a hazard when handled and thrown away. Furthermore, facemasks don’t cover eyes. Although the nose is the main route for coronavirus into the lungs,  some researchers believe  the eye’s conjunctiva is another possible point of entry. That’s why Israeli physician and serial medical-device inventor Dr. Noam Gavriely worked quickly to develop what he calls the  ViriMASK Protective Oculo-Respirator . ViriMASK is strapped around the head, covering the eyes with a see-through visor and the nose and mouth with a filtering mechanism....
Post a Comment
Read more

Ventilaid breathing device Mk III

By
VentilAid is a very simple, yet effective device for non-invasive ventilation. It is especially projected to help patients suffering from COVID-19. VentilAid helps breathing, prevents alveoli from collapsing and monitors patients health. Major features Compactness and mobility Universal power supply Automatic function in CPAP and BiPAP modes FiO2 do 70%, Up to 70% FiO2 Pressure up to 15 cm H2O (wi th a greater technical capablity of up to 30cm H2O) The device adapts to the breathing rhythm of the patient https://www.ventilaid.org/ventilaid-breathing-device-mk-iii/
Post a Comment
Read more
By
Mask Strap Efficiency  This simple but useful tool is designed to make face masks less painful to wear for medical workers treating coronavirus patients. The part is made by printing a set, and then connecting with any filament which will also set its width.  In this way, the filament which is needed for a single print is reduced and 18 sets on a 250x250mm print bed are allowed. Small protrusions on both sides of the plastic buckle hold the mask strap and the mask strap does not exert painful pressure on the ears. References: Michael B. ( 2020 ). Prusa Printers. Mask strap efficiency print. https://www.prusaprinters.org/prints/28959-mask-strap-efficiency-print
Post a Comment
Read more